PIPING AND FITTING DESIGN GUIDE
The following points provide a brief guide to tubing and fitting design for instrument tubing and fittings. Selection preferences may vary between projects.
The selection of connection materials must take into account the process fluid pressure and pressure rating to ensure good sealing and integrity.
The pipe thickness must be selected based on the nominal application pressure. Consult the manufacturer for the pressure rating for each thickness of tubing.
Dual compression hose fittings are preferred.
For the entire project, it is absolutely necessary to use typical components of hoses and fittings from one manufacturer.
Mixing different threaded fittings from different manufacturers is not allowed, as this could lead to poor sealing of the fitting.
.png)
No comments:
Post a Comment